Differences

This shows you the differences between two versions of the page.

--- epa_basis_reader [2010/12/08 17:01] – [The PSoC microcontroller (Cypress CY7C64316)] steve_m
+++ epa_basis_reader [2012/12/02 21:52] (current) – [The chips] steve_m
@@ Line 1: / Line 1: @@
-====== ReinerSCT RFID basis reader ======
+====== Taking apart the ReinerSCT nPA RFID Basisreader ======
 The ReinerSCT basis reader is a pretty basic reader for mifare cards and the new german ident-card (ePA or nPA).
-It was sold with german computer-magazine ComputerBild 26/2010 for €3,70 instead of the initial €34,90. It comes with a OWOK rfid card.
+It was sold with german computer-magazine ComputerBild 26/2010 for €3,70 instead of the retail €34,90. It comes with a OWOK rfid card.
 There is a [[http://www.mikrocontroller.net/topic/199865|thread]] on german µC-related forums [[http://www.mikrocontroller.net/|Mikrocontroller.net]] discussing the hackability of this reader as well.
@@ Line 23: / Line 23: @@
 ===== The chips =====
-^NXP PN512 (RFID transceiver, [[http://www.nxp.com/documents/data_sheet/111334.pdf|datasheet]])^Cypress [[http://www.cypress.com/?mpn=CY7C64316-16LKXC|CY7C64316]] ([[http://www.cypress.com/?docID=24330|datasheet]]), implements the USB CCID -> PN512 SPI interface^
+^NXP PN512 (RFID transceiver, [[http://www.nxp.com/documents/data_sheet/PN512.pdf|datasheet]])^
-|package: HVQFN32 (SOT617-1)|package: HVQFN16 (SOT758-1)|
+|package: HVQFN32 (SOT617-1)|
-|{{:rfid_pn512.jpg|NXP PN512}} | {{:rfid_4316.jpg|4316}}|
+|{{:rfid_pn512.jpg|NXP PN512}}|
+^Cypress [[http://www.cypress.com/?mpn=CY7C64316-16LKXC|CY7C64316]] ([[http://www.cypress.com/?docID=35960|datasheet]]), implements the USB CCID -> PN512 SPI interface^
+|package: HVQFN16 (SOT758-1)|
+|{{:rfid_4316.jpg|4316}}|
 ^NSC [[http://www.national.com/mpf/LP/LP3982.html#Overview|LP3982 (LP3982IMM-ADJ)]] ([[http://www.national.com/ds/LP/LP3982.pdf|datasheet]])  (5V -> 3.3V voltage regulator)^^
@@ Line 52: / Line 56: @@
   * 2KB RAM
   * M8C architecture
-    * There is an open-source assembler for this architecture called [[http://m8cutils.sourceforge.net/index.html|m8cutils]]
+    * There is an open-source assembler for this architecture called m8cas, which is part of [[http://m8cutils.sourceforge.net/index.html|m8cutils]]
+    * contains a disassembler as well, m8cdas
+    * There's another disassembler called m8cdis: [[http://www.cypress.com/?app=forum&id=1573&rID=43998|forum post]], [[https://code.google.com/p/m8cdis/|code]]
+    * [[http://www.das-labor.org/wiki/GRAS/en|GRAS]], the Generic Assembler, supports the m8c as well
+    * Yet another assembler, GPLv2 bootloader, USB code [[http://iguanaworks.net/projects/IguanaIR/browser/trunk|here]]
   * internal oscillator with up to 24MHz
   * supports ISSP (in-system serial programming)
-    * <del>it doesn't seem that there are any open-source programmers like for the AVR out there</del>
-    * [[http://m8cutils.sourceforge.net/index.html#progssrc|m8cprogs]], as part of m8cutils, contains schematics for various programmers, but it is unclear yet if it works with the enCoRe V series of PSoCs (to which the CY7C64316 belongs to)
+**Notes:**
-    * the Cypress [[http://www.cypress.com/?rID=3412|CY3210 MiniProg1]] seems to support the CY7C64316
+  * [[http://m8cutils.sourceforge.net/index.html#progssrc|m8cprogs]], as part of m8cutils, contains schematics for various programmers, <del>but it is unclear yet if it works with the enCoRe V series of PSoCs (to which the CY7C64316 belongs to)</del>
+  * the Cypress [[http://www.cypress.com/?rID=3412|CY3210 MiniProg1]] supports the CY7C64316
+  * I hacked m8cprog to support the chip, by sniffing what the MiniProg1 does, so it is now possible to flash custom code via ISSP without the need for a quite expensive MiniProg1
+    * Get the code [[https://github.com/steve-m/m8cutils/tree/cy7_prog|here]]
+  * With a few tricks I was able to [[http://www.youtube.com/watch?v=R6NdeUanK7s|dump]] the firmware
 ^the chip^package pinout^pin^port^I/O^signal^
@@ Line 81: / Line 93: @@
 /* NXP PN512 initialization
  * this was obtained by sniffing the communication between the PN512 and the
- * USB-chip in the ReinerSCT Basisreader, and decoding it with the datasheet.
+ * CY7C64316 in the ReinerSCT Basisreader, and decoding it with the datasheet.
  *
  * (C) 2010 by Steve Markgraf <steve@steve-m.de>
@@ Line 376: / Line 388: @@
   (Bus Powered)</code>
+===== Other readers =====
+There are other devices (Basislesegeräte) which have been [[http://www.ccepa.de/basiskartenleser|certified by the BSI]]:
+^device^SCM SCL011^SCM SDI011 (not yet certified)^SCM SDI010^
+|link|[[http://www.scmmicro.com/de/products-services/chipkartenleser-terminals/kontaktlos-dual-interface/scl011.html|SCL011]]|[[http://www.scmmicro.com/products-services/smart-card-readers-terminals/contactless-dual-interface-readers/sdi010.html|SDI011]]| |
+|type|RFID|RFID/SC dual|RFID/SC dual|
+|used microcontroller|SCM STC3|SCM STC II-B|SCM STC II-B|
+|used RFID transceiver|NXP PM512HN|?|?|
+|firmware update available|[[http://support.scmmicro.com/dfu_fw.php?lang=0&readerno=85|yes]]|no|[[http://support.scmmicro.com/dfu_fw.php?lang=0&readerno=83|yes]]|
+|FCC-ID|[[https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=913923&fcc_id=%27MBPSCL011-4400%27|MBPSCL011-4400]]|[[https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=731440&fcc_id=%27MBPSDI011-1000%27|MBPSDI011-1000]]|[[https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=662322&fcc_id=%27MBPSDI010MOD02%27|MBPSDI010MOD02]]|
+|pcb pictures|  yes, see link above ('Internal photos')  |||
 ~~DISCUSSION~~